GTA 6 ARENA

How to fix stick drift

Lower the stick deadzones in Settings > Controller (PS5 starts at 4; try 2 to 3) until the camera stops creeping. Still drifting? Reset or clean the controller.

Key facts

FixLower stick deadzones in Settings > Controller, then reset or repair the controller

Details

Stick drift is the camera or character moving when you are not touching the stick. The deadzone is how far a stick must move before the game reacts.

In-game fix (PS5)

  1. Pause, open Settings, press R1 to reach the Controller tab and scroll to DualSense Wireless Controller Features.
  2. You will see Deadzone (Left Stick) and Deadzone (Right Stick); both start at 4.
  3. Set both to 2, put the controller down or release both sticks, and watch the screen for a few seconds.
  4. If the camera still moves, raise the deadzone by 1 and test again, until it stops.
  5. Press Square on a row to reset it to default, or Triangle to reset the whole tab.

Do not leave a drifting stick on 0: the game then reacts to the smallest wobble. On Xbox the deadzones run 0 to 10 and start at 5.

If the deadzone is not enough (the stick itself is worn)

  • Roll both sticks in full circles while pressing down, to free dirt.
  • DualSense (the PS5 controller): press the small reset hole on the back with a pin, then reconnect by cable and update it.
  • Recalibrate a DualSense from a PC with a web calibration tool over USB.
  • Clean the stick with a cotton swab and acetone, replace the stick module, or take the pad to an authorized repair centre.

A bigger deadzone hides drift; it does not repair the stick, and aiming gets less precise.

More in Fix a problem

Sources (4)
  1. GTA 6 best controller settings Beebom · Press · 20 Nov 2026
  2. How to Fix Stick Drift on PS5 and Xbox Controllers Beebom · Press · 18 Nov 2026
  3. GTA 6 on PS5: How to Turn Off Adaptive Triggers and Change Sensitivity AllThingsHow · Guide site · 19 Nov 2026
  4. Best controller settings Dexerto · Guide site